I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

difficulties to contact @#$%&.
Posted by: didier stephan (---.34.93.79.rev.sfr.net)
Date: May 20, 2011 08:05PM

Hello .

Since tuesday 22 , i am trying to contact @#$%& . With two email address .
( not by telephone , because I do not speak English well enough though.)

Are they on vacation, perhaps? Or other maybe ?

It works for you?

Thanks .

D.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Tom Kirkman (Moderator)
Date: May 20, 2011 08:44PM

Mark@@#$%& is the only contact information I can offer.

...............

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Kern Davis (184.4.177.---)
Date: May 20, 2011 09:24PM

Try colleen@@#$%&. It may take them a few days to get back to you. I have ordered components from them several times . Never had a problem with them. they are open alternate weekends.

Kern Davis, Lady Lake Fl.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: didier stephan (---.34.93.79.rev.sfr.net)
Date: May 21, 2011 05:05AM

Hello .

Thanks .

Those are the two that i have used .(I may have a plumbing problem? ;)
I think they are the sole distributor of some Micto Tiptop rings.

So I'll try again.

D.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Mark Blabaum (---.yousq.net)
Date: May 21, 2011 07:39AM

Didier, I know that some spam filters will block e/mails that are from outside the country. I hope that some one from Acid Rod will see this post and try to contact you.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Jeff Frei (12.213.112.---)
Date: May 21, 2011 12:12PM

I have found @#$%& be very slow to ship and unresponsive to my emails.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Bob Mankin (---.nextweb.net)
Date: May 21, 2011 12:25PM

Micro tips are available through other sources if you have to go to Plan B. They may be special order in some cases, but I have some 3.5 tube/4 ring tips in braced tops. These came from Phenix. Have some braced design Alps on order in sizes down to 4 tube/4 ring and I believe those will become more widely available shortly.



Edited 1 time(s). Last edit at 05/21/2011 12:25PM by Bob Mankin.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: didier stephan (---.34.93.79.rev.sfr.net)
Date: May 21, 2011 02:05PM

Mark , i hope it too ;)

Bob , to my knowledge,to get some MicroTop ,ring size 4 and tube up to 7.5 , @#$%& is the place to.
My plan is to be able to put on the table all Microtop available, so i can compare.

I read with interest that some new Microtop are coming soon .Thanks .

D.

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: Rick Heil (---.hsd1.or.comcast.net)
Date: May 21, 2011 03:05PM

Didier,

Have you tried [www.schneidersrods.com] He is very prompt in his order and shipments in fact he has Micros you can not get from any other vendor. Specifically the Black frame with gold ring Micros. I have built three rods with these and they are very very nice ! He uses US mail to get me my orders which is much faster than UPS or Fed Ex. I use acid-rod.com for only a back up if anything but I allow a week to even get a single item shipped to me. I am not sure why there not very prompt in there response's to any contact. But I have canceled orders with them for this reason alone. I am not saying its a bad place to order from just allow a lot of lead time to get what you want from them. Hope you get what you need and Happy wraps to you !

Rick H.

rwheil@msn.com

Website
[www.facebook.com]
[home.comcast.net]

Options: ReplyQuote
Re: difficulties to contact @#$%&.
Posted by: didier stephan (---.34.93.79.rev.sfr.net)
Date: May 21, 2011 05:05PM

I just received an email from Colleen, who has been warned that I tried to conatct.

Thank you to those who helped !

D.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster