SPONSORS
2024 ICRBE EXPO |
Fly rod tip top sizes
Posted by:
Bill Jovanovski
(---.bfcz1.lon.bigpond.net.au)
Date: May 17, 2011 06:57AM
Are fly rod tips measure the same way as say spin rod tip top. I measured the tip use a tip top measuring tool which I got from mudhole. Its say that 4.0 or 4.5 is good fit. Does this sound about right for a 5wt. 9ft. Re: Fly rod tip top sizes
Posted by:
George Forster
(---.hsd1.co.comcast.net)
Date: May 17, 2011 07:49AM
Bill,
Tubes for fly rod tip tops are measured the same way as any other tip top. Make sure that you're taking the measurement about a half an inch (13mm) down from the end of the tip. 4 or 4.5 seem about right for a 5 weight, but only you can tell for sure. It could be a 5.0...all depends on the design, and the final sanding done by the manufacturer. Trust your measurement. In the future, whne ordering, you can ask Mudhole, or any other supplier, to check the fit of tip top before shipping. George Forster Fort Collins, CO Edited 1 time(s). Last edit at 05/17/2011 07:49AM by George Forster. Re: Fly rod tip top sizes
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 17, 2011 07:54AM
if you measure then prep the blank it will or should fit. Also if you get one loose you can wrap some A thread to take up any slack Bill - willierods.com Edited 1 time(s). Last edit at 05/17/2011 07:57AM by bill boettcher. Re: Fly rod tip top sizes
Posted by:
Bill Jovanovski
(---.sgs.immi.gov.au)
Date: May 17, 2011 06:07PM
Thanks lads,
dont suppose anyone knows what the thread colour is for this rod. Ive contacted Sage but Im still waiting for a reply. I need to order the threads as soon as possible. Cheers Re: Fly rod tip top sizes
Posted by:
Phil Erickson
(---.dsl.sfldmi.sbcglobal.net)
Date: May 17, 2011 11:30PM
What is the rod? Sage what? If Sage Z axis they used Gudebrod #360 Re: Fly rod tip top sizes
Posted by:
Bill Jovanovski
(---.bfcz1.lon.bigpond.net.au)
Date: May 18, 2011 06:29AM
Sorry i forgot to mention the rod. Its a Sage RPL 590-4 Graphite III. Just got email from Sage and they inform me that they use
thread color : GUD 541A (med brown) trim color : GUD 541 A NCP (med brown) Just in case some else is need to know. Cheers Sorry, only registered users may post in this forum.
|