SPONSORS
2024 ICRBE EXPO |
MHX FLY ROD
Posted by:
Wes Christy
(---.rh1.dyn.cm.comporium.net)
Date: April 02, 2011 12:07AM
Want to get an MHX Fly rod kit for Reds, trout, anything in the inlets and backwaters. Also may occasionally use it for bass very rarely. any recommendations... a lot of people have said to get a ten weight rod but I'm fairly new to fly fishing itself, built plenty, but just starting to use them more. Re: MHX FLY ROD
Posted by:
Drew Pollock
(---.100-30-64.ftth.swbr.surewest.net)
Date: April 02, 2011 12:20AM
Just built an MHX 8. It's a very decent rod with lots of backbone. 10wt would handle some very large fish and is probably overkill, especially with Bass on the menu.
I'd love to hear more feedback on MHx. I've built a 5 and an 8 and extremely pleased with both. Any comparisons to Batson RX8? Drew Re: MHX FLY ROD
Posted by:
Jim Gamble
(97.106.17.---)
Date: April 02, 2011 09:05AM
7 on the lighter side, 8 on the heavier side ... definitely not a 10 weight. Re: MHX FLY ROD
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: April 02, 2011 09:10AM
8 will be fine . Re: MHX FLY ROD
Posted by:
Darrell L.Pack
(---.qncyfl.dsl.dynamic.tds.net)
Date: April 02, 2011 10:23AM
Wes; Want are the fishing condition's? Strong winds, sight fishing for tailing fish vs. broadcasting,wade or boat. I build for a large fly club and the most popular rod I build is a 9ft 9wt. If you know a fisherman that fish's the area you fish ask ! ! ! Re: MHX FLY ROD
Posted by:
Wes Christy
(---.rh1.dyn.cm.comporium.net)
Date: April 02, 2011 11:29AM
most of the time its semi windy, 5-10 mph, and most of the time you are just fishing in muddy water. and most of the people i would be fishing with refuse to use a fly rod unfortunately. Re: MHX FLY ROD
Posted by:
Todd Kreikamp
(---.hsd1.va.comcast.net)
Date: April 03, 2011 10:16AM
the 8 will do exactly what you want. Definitely do not need the 10wt. Save the 10 for cobia or big ocean run stripers. I have bullt a few of the MHX-890-4's and they cast extremely well. Rod is very light and won't wear you out after a full day of casting. Absolutely perfect for trout, reds, flounder, croaker and other inshore species. Have thrown sink tips up to 350 grains with them and no problems. Another great value would be a Batson RX8 in the 8wt. Can't go wrong with either. Re: MHX FLY ROD
Posted by:
Eugene Moore
(---.244.215.181.Dial1.StLouis1.Level3.net)
Date: April 03, 2011 01:06PM
Wes,
Unless you are looking at a lot of double digit fish the 8 would be a lot less exhausting for a full day of casting. Much more enjoyable for the single digit guys also. Eugene Moore Re: MHX FLY ROD
Posted by:
Carl Seutter
(---.mtaonline.net)
Date: April 04, 2011 11:42PM
I built myself a 9ft 8wt MHX 4 piece and it handles 8-14 lb coho salmon and 30" + rainbows just fine in swift currents. Re: MHX FLY ROD
Posted by:
Eric Viburs
(---.ri.ri.cox.net)
Date: April 05, 2011 08:04PM
I have not fished for reds but just bought a 10wt for tossing 8' dead chickens to Muskie. Seams like from what I have seen it would be too heavy for your needs. This thing is a meat stick to say the least. Re: MHX FLY ROD
Posted by:
Steve Johnson
(---.hsd1.fl.comcast.net)
Date: April 06, 2011 12:42AM
I picked up an 8wt 9' 2pc MHX at the expo and have to agree with Eugene. It is very light, fast and powerful. Mine weighs in at 1.62 oz which is extremely light for an 8 weight. I will probably save it until I know I'm throwing to 25-30+ inch reds, jacks, spanish or other stronger species. My #1 gun for backwater reds & trout will be a 6 weight. Do yourself a favor and go with a 6,7 or 8 depending on wind and the size of fish you'll be targeting. IMO, 10 would be overkill.
Steve Sorry, only registered users may post in this forum.
|