SPONSORS
2024 ICRBE EXPO |
Guide Calculator
Posted by:
Marc Wisniewski
(99.13.220.---)
Date: March 25, 2011 09:44PM
Is there a good guide spacing calculator out on the web somewhere? The one on www.uwm.... does not seem to work anymore.
Thanks Re: Guide Calculator
Posted by:
Eugene Moore
(---.244.208.60.Dial1.StLouis1.Level3.net)
Date: March 25, 2011 10:15PM
Marc,
You might try one from this website Several available [www.rodbuildingtutorials.com] Eugene Moore Re: Guide Calculator
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: March 26, 2011 10:00AM
Mud Hole carries the Don Morton Guide spacing chart whch allows for the placement of micro guides and Fuji Concept Guide spacing. I believe it cost something like $39.95, in that range.
I use it for placement of micro guides and have been very happy with it. Don Campbell don@sensorfishingrods.com Re: Guide Calculator
Posted by:
Marc Wisniewski
(99.13.220.---)
Date: March 26, 2011 02:44PM
Thank you! Re: Guide Calculator
Posted by:
David Aiello
(---.bstnma.fios.verizon.net)
Date: March 26, 2011 08:31PM
I have one from mudhole that I use for micro guides here is the link. It has treated me good. I also do calculations and check the placement of the guides by taping them all first. I place my rod in rig I made string a line through to an eye on the 2x4 on the ground with wieght. That will show me the rod under load and give me the correct placement of the guides by looking at the through the guides. I made up this rig years ago. If you look on the pictures in this site you will see some made out of wood and plastic, But the one from mud hole is great.
[www.mudhole.com] Sorry, only registered users may post in this forum.
|