SPONSORS
2024 ICRBE EXPO |
Hate to beat this dead horse - But
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 13, 2011 03:09PM
But - has any one built on any of these blanks [www.mudhole.com] I am looking at the 6' and 6'6 2 piece They are ratted as - fast ??? Bill - willierods.com Edited 2 time(s). Last edit at 03/13/2011 05:31PM by bill boettcher. Re: Hate to beat this dead horse - But
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 13, 2011 11:20PM
Bill,
I was looking at these blanks as well. I have seen some prior posts about them, but haven't seen one in person. If you find one or hear about them, let me know. Thanks much Roger Re: Hate to beat this dead horse - But
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: March 14, 2011 12:00AM
For $40 just order one and see for yourself. It's not much money at all and it's better than relying on anyone else. Worst case is you aren't crazy about it and you spent $40 Re: Hate to beat this dead horse - But
Posted by:
Jody Pierce
(12.179.106.---)
Date: March 15, 2011 02:21PM
I picked up the 6' 2 piece at the expo. I'm just starting to build it so I can't offer much input. I will say that I wouldn't call the action fast.... it's more of a moderate action. It seems to have decent backbone for such a lightweight rod. Re: Hate to beat this dead horse - But
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 15, 2011 02:54PM
Thanks for your input Jody I have several mod-fast / med fast blanks I already got. I like the fast way or fast casting stroke and should have never even looked at any thing below fast.
But then with all the hype the only thing that really tells you the line that belongs on any blank is CCS At 30 foot off the tip But again it is in the feel that a caster likes Which can vary greatly If you can put some CCS numbers on that puppy. Just for jokes and laughs Bill - willierods.com Re: Hate to beat this dead horse - But
Posted by:
Jody Pierce
(12.179.106.---)
Date: March 15, 2011 03:05PM
I'm pretty new at this so you lost me with CCS. If it's something I can do easily I'll gladly give it a shot but I'll need an explanation. Also, I am building this as a spinning outfit, not a fly rod. Re: Hate to beat this dead horse - But
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 15, 2011 03:24PM
This is the System that when done correctly will be able to tell a builder what fly line - and - what lure will work well with any blank.
Check it out : [www.common-cents.info] Bill - willierods.com Re: Hate to beat this dead horse - But
Posted by:
Jody Pierce
(12.179.106.---)
Date: March 15, 2011 04:16PM
I'll take a look. Thanks. Sorry, only registered users may post in this forum.
|