SPONSORS
2024 ICRBE EXPO |
Guides GABRG ?
Posted by:
Daryl Norvell
(---.proxy.aol.com)
Date: March 07, 2011 05:17PM
I have a (what I would call) partial set of guides I bought a while back.
They were sold to me as model GABRG. No maker was stated. They are braced, double foot guides with a gold finish. No shock ring. The frames seem to be made of aluminum or magnesium. The guides are offset in the frames. One brace is longer than the other. I'm assuming the longer brace goes toward the tip of the rod. I bought a set of 25,20,20,16,14. I would like to find maybe 30,12,10 in them. I've searched the web many times trying to find some like them. I'm assuming that, if anyone does have them, they must have a prefix before GABRG. (i.e. PBGABRG, FJGABRG) I took a photo of them (as best I could with a new camera I haven't gotten used to). But, I can't see how to post a photo on the forum. Daryl Re: Guides GABRG ?
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: March 07, 2011 07:08PM
Looks like garbage to me. Sorry, couldn't resist. I have no help for you other than that joke. Good luck Re: Guides GABRG ?
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: March 07, 2011 09:13PM
You will have to log in to the photo section and post it up there. Re: Guides GABRG ?
Posted by:
Daryl Norvell
(---.proxy.aol.com)
Date: March 07, 2011 09:38PM
No Billy, that's GABRG, not GARBG ! LOL
Ken, Thanks, I'll wait to post a pic until someone thinks they may know of the guides by my description, or might have some personally that might be like these. Re: Guides GABRG ?
Posted by:
Bob Balcombe
(---.ka.centurytel.net)
Date: March 08, 2011 04:24AM
Billy you are cruel! From the description. They sound like some off the shelf cheep guides. Good Wraps Bob Re: Guides GABRG ?
Posted by:
Bill Eshelman
(---.skylan.net)
Date: March 08, 2011 07:13AM
Billy,
You must lay awake at night just laughing at all of the comments you make in a days time! You crack me up ! LOL Bill Ohio Rod Builders Canton, Ohio Sorry, only registered users may post in this forum.
|