SPONSORS
2024 ICRBE EXPO |
Fishhawk Questions
Posted by:
Mark Marshall
(---.dhcp.jcsn.tn.charter.com)
Date: February 28, 2011 06:37PM
Could some of you familar with Fishhawk threads help me with the following?
1. What is the difference in regular metallic Fishhawk thread and their "P" metallic? 2. What is the diameter of Fishhawk's variegated thread? Re: Fishhawk Questions
Posted by:
kevin knox
(---.baybroadband.net)
Date: February 28, 2011 07:11PM
Regular metallic and P are different in that the "P" thread has a polyester core and the regular metallic has a nylon core, rice paper covering and then the metallic on top of that. It is available in A and D in the "P" thread and "A" in the metallic. The verigated thread is available in "A" only.
Hopefully I answered your questions fully! Kevin Re: Fishhawk Questions
Posted by:
Mark Marshall
(---.dhcp.jcsn.tn.charter.com)
Date: February 28, 2011 10:06PM
Does anyone know the actual diameter? Re: Fishhawk Questions
Posted by:
Bob Pratt
(---.cust.wildblue.net)
Date: February 28, 2011 11:04PM
Using my 0-1 inch mic and my cheapo calipers I got .006 of an inch on some red Metallic, I have no idea if this is within there tolerances. I got the same number on both.
Bob Re: Fishhawk Questions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: March 01, 2011 10:51AM
I have used A thread and D or E metallic and after finish could not tell the difference. Bill - willierods.com Sorry, only registered users may post in this forum.
|