SPONSORS
2024 ICRBE EXPO |
ICRBE Seminars What to do?
Posted by:
Michael Joyce
(---.hsd1.nh.comcast.net)
Date: February 22, 2011 02:25PM
Just a question for some of the builders attending the ICRBE....which seminars are you targeting to attend this year?.....(I'm just curious based on the line up)
MJ NERB that types with a bar of Ivory soap in his mouth. Re: ICRBE Seminars What to do?
Posted by:
Lou Auret
(204.16.161.---)
Date: February 22, 2011 02:54PM
The talks by the manufacturers on both Saturday and Sunday as to what is on the horizon blank material wise and rod/blank design wise.
A lecture or two from the Thread King Billy in full wizard regalia is essentia for us Non Nerbs folks. Foam Core Grips clashes with Gary Loomis the one day and and i will somehow need to see that too but how can I miss the talk about Epoxies by Ralph O'Quinn? Hydro painting sounds just off the wall enough that i need to see it. So short answer is I don't know how to do it all. However I plan it, my plan will go wrong, I WILL get side tracked, time will fly and it will still be good. Re: ICRBE Seminars What to do?
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: February 22, 2011 03:58PM
Being a blank builder junkie I'll be at the Gary Loomis and Jason Brunner seminars... The rest will be spent guarding the NERBS booth from rod rack knock overs.. Re: ICRBE Seminars What to do?
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: February 22, 2011 04:33PM
Be filming Billys' dec wraps seminars. Which is an area that I'm just starting to understrand..Wish I could put colors together with more flair.
Just a thanks for getting the NERBS started. Bill Re: ICRBE Seminars What to do?
Posted by:
Tom Kirkman
(Moderator)
Date: February 22, 2011 04:45PM
No filming is allowed. Sorry.
................ Re: ICRBE Seminars What to do?
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: February 22, 2011 04:49PM
TOm, Bill is going ot help me during my seminars, since I move around and need the camera focused on different areas. I did this last year as well. Gotcha on the no videotaping other than for the screen in the room Re: ICRBE Seminars What to do?
Posted by:
Tom Kirkman
(Moderator)
Date: February 22, 2011 04:51PM
That's fine then. No problem.
............ Re: ICRBE Seminars What to do?
Posted by:
kevin knox
(---.z65-44-65.customer.algx.net)
Date: February 22, 2011 05:51PM
Tom,
are video cameras allowed throughout the displays? Re: ICRBE Seminars What to do?
Posted by:
Bill Ballou
(---.hsd1.tn.comcast.net)
Date: February 22, 2011 06:39PM
sORRY ABOUYTHE MISUNDERSTANDING Re: ICRBE Seminars What to do?
Posted by:
Tom Kirkman
(Moderator)
Date: February 22, 2011 06:48PM
Sure, you can video tape in the exhibit hall, just not in the seminar rooms. Thanks.
............. Re: ICRBE Seminars What to do?
Posted by:
Michael Joyce
(---.hsd1.nh.comcast.net)
Date: February 22, 2011 07:04PM
Thread was hijacked.............. Re: ICRBE Seminars What to do?
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: February 22, 2011 07:05PM
no --- NERB'd
------------ I'll share the soap with you Re: ICRBE Seminars What to do?
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: February 22, 2011 07:32PM
This is a hard question as there is never time for all the ones I would like to go to.
1. Foam core grips is a must for me. 2. Abalone inlays will be useful 3. Thread weaving is interesting to me 4. Using alternate materials should be interesting also 2008 I had eight or so seminars picked out and I only made to one. There is just so much to see and people to talk too. I`m not complaining though. Bill Ohio Rod Builders Canton, Ohio Re: ICRBE Seminars What to do?
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: February 22, 2011 09:26PM
the abalone should be an eye opener even for builders who have done this before....Kevin has some new stuff that you won't believe until you see it for yourself Re: ICRBE Seminars What to do?
Posted by:
Bob Mankin
(---.nextweb.net)
Date: February 22, 2011 11:40PM
John, is that you doing the hydro paint seminar?
I'm a left coaster and can't make it this year, but would love to hear more post conference. About to have some seats done by the folks in the northwest. Re: ICRBE Seminars What to do?
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: February 23, 2011 12:42AM
it is how you can do the process yourself...there is an article in the latest rodmaker Re: ICRBE Seminars What to do?
Posted by:
Bob Mankin
(---.nextweb.net)
Date: February 23, 2011 12:50AM
I'll look for it. Thanks. Re: ICRBE Seminars What to do?
Posted by:
Dan Makauskas
(---.hsd1.in.comcast.net)
Date: February 23, 2011 08:58AM
Getting back to the topic....
With the issues I have with thread finish, I think Ralph O'Quinn is a must see. Re: ICRBE Seminars What to do?
Posted by:
HANK Turner
(---.hr.hr.cox.net)
Date: February 24, 2011 10:14AM
I omly wish I could attend them all Sorry, only registered users may post in this forum.
|