I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Expor Vendor Floor Layout
Posted by: Walt Stock (---.dtccom.net)
Date: February 14, 2011 02:19PM

Looking forward to the Expo - just wondering if there is a Floor Plan for the exhibition area and training rooms? First time for me and it would be great to know which way to go when the doors open.

Cheers

Options: ReplyQuote
Re: Expor Vendor Floor Layout
Posted by: Tom Kirkman (Moderator)
Date: February 14, 2011 02:30PM

There is one in the new magazine which most should get late this week or early next week. There will also be one in the Atrium just inside the exhibit hall.

.................

Options: ReplyQuote
Re: Expor Vendor Floor Layout
Posted by: Ken Preston (---.bltmmd.fios.verizon.net)
Date: February 14, 2011 03:05PM

Walt - there is a floor plan under the RodMaker Magazine Blog (to the left) down several articles that might do for you until the magazine arrives

Options: ReplyQuote
Re: Expor Vendor Floor Layout
Posted by: John Britt (---.tampabay.res.rr.com)
Date: February 14, 2011 03:32PM

Try scrolling down [www.rodmakermagazine.com]

Options: ReplyQuote
Re: Expor Vendor Floor Layout
Posted by: Walt Stock (---.dtccom.net)
Date: February 14, 2011 04:03PM

Thanks for the help.

Options: ReplyQuote
Re: Expor Vendor Floor Layout
Posted by: Tom Kirkman (Moderator)
Date: February 14, 2011 04:22PM

That floor plan has been changed just a bit. Several more vendors came in at the last minute and I had to add additional booths and reshuffle a few things.

................

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster