SPONSORS
2024 ICRBE EXPO |
Renzetti lathe for sale
Posted by:
Bill Napier
(---.hosted.static.webnx.com)
Date: February 08, 2011 12:30PM
I know somebody is always looking so thought I would mention that there is a used Renzetti lathe on the buy sale page today. [www.rodbuilding.org] Re: Renzetti lathe for sale
Posted by:
Dale Thiel
(---.mpls.qwest.net)
Date: February 08, 2011 07:48PM
I set a message to the site on the renzetti lathe and received no answer on it. Re: Renzetti lathe for sale
Posted by:
Tom Kirkman
(Moderator)
Date: February 08, 2011 08:36PM
Give the guy time to reply. He might have had to work today.
.............. Re: Renzetti lathe for sale
Posted by:
Doug Cox
(74.206.84.---)
Date: February 09, 2011 07:13PM
I also sent a e-mail last week with a couple of questions - no reply yet. The e-mails may have gone to his spam filters/folders and he has not checked there yet. Re: Renzetti lathe for sale
Posted by:
Jim Meallows
(---.dhcp.oxfr.ma.charter.com)
Date: February 10, 2011 03:57PM
Yeah something is strange there. I can't even find a Bruce Rasmussen in the members list. I emailed him almost right after he posted that with my email and cell and have heard nothing back yet. And that post has almost 700 views. Yikes Re: Renzetti lathe for sale
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: February 10, 2011 04:50PM
I also did a search and found nothing. Then I put his name in my browser and after reading about 300 names I came up with this. anglers roost link Custom Rod Builders - This message board is provided for your ... J Stockard Fly Fishing Janns NetCraft Mar Ktruz LDA ... in angler's should be an apostrophe thanks Bruce rasmussen
rodbuilding.org/read.php?2,307996,308188 Who ever he is he belong to the rod building community. Good Wraps Bob Member's List?
Posted by:
Tom Kirkman
(Moderator)
Date: February 10, 2011 05:16PM
You don't have to be registered on the forum to use the buy/sell page.
On another note, I own and operate the forum and never knew it had a "members" list. Can you advise where I can find that? I show just over 7000 registered users in the database currently, but again, have no idea where to locate the members list. It one does exist, I'd love to know about it. This forum may have more features than I thought it did. Thanks. .............. Re: Member's List?
Posted by:
Doug Cox
(74.206.84.---)
Date: February 10, 2011 06:55PM
He is registered on this site but has not posted in a while. Re: Member's List?
Posted by:
Jim Meallows
(---.dhcp.oxfr.ma.charter.com)
Date: February 10, 2011 08:22PM
Tom Kirkman Wrote:
------------------------------------------------------- > You don't have to be registered on the forum to > use the buy/sell page. > > On another note, I own and operate the forum and > never knew it had a "members" list. Can you advise > where I can find that? I show just over 7000 > registered users in the database currently, but > again, have no idea where to locate the members > list. It one does exist, I'd love to know about > it. This forum may have more features than I > thought it did. Thanks. > Ahhhh I did not realize you could post without being registered. Most sites I go to have a "members list" I found yours here [www.rodbuilding.org] although this may not be a complete list Did not mean to offend anyone Re: Member's List?
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: February 11, 2011 04:04PM
Has anyone heard from the guy Good Wraps Bob Re: Renzetti lathe for sale
Posted by:
Tom Kirkman
(Moderator)
Date: February 11, 2011 06:54PM
No, no no. That's a members gallery from the photopost page, and only includes a very few of the roughly 3000 registered there. It's not a members list at all. Just the gallery database of those who have posted photos.
The forum is a separate website and as I felt sure, does not include any sort of members' list. .................... Sorry, only registered users may post in this forum.
|