SPONSORS
2024 ICRBE EXPO |
50mm double foot wire guide
Posted by:
Garrett Adams
(---.mia.bellsouth.net)
Date: February 07, 2011 08:36PM
Anyone know where I can get one? I had a strange request for a new build. needs to be tough.
kinda like this one......... [www.jannsnetcraft.com] NOT like the american tackle BGB's. more like the non-fouling type. Thanks! Garrett Re: 50mm double foot wire guide
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 08, 2011 08:37AM
The only thing I find in a 50 is this, not the same but ?? [www.jannsnetcraft.com] Bill - willierods.com Edited 1 time(s). Last edit at 02/08/2011 03:52PM by bill boettcher. Re: 50mm double foot wire guide
Posted by:
Darrell L.Pack
(---.qncyfl.dsl.dynamic.tds.net)
Date: February 08, 2011 01:00PM
Hello Garrett: I have so.me 50mm in stock. Please email your address and I will send you some pic's Re: 50mm double foot wire guide
Posted by:
Garrett Adams
(---.mia.bellsouth.net)
Date: February 08, 2011 02:17PM
Darrell,
THANKS. Your e-mail is hidden. You can send me pictures to gadams1qz@bellsouth.net. What sizes do you have? I may need an assortment of 50's down to 10's. THANKS AGAIN GARRETT Re: 50mm double foot wire guide
Posted by:
Garrett Adams
(---.mia.bellsouth.net)
Date: February 08, 2011 02:18PM
Thanks Bill..... That's all I could find as well. Re: 50mm double foot wire guide
Posted by:
Larry Grimm
(---.proxy.aol.com)
Date: February 09, 2011 10:12AM
I believe what you are looking for is GUDEBROD AETNA guides , I scrounge mine from older clunker rods , clean them up for use. These are cool called non-fouling guides. A popular guide in the 70's , some wire former kits had layouts for these guides , and could be hand made cheap and easy, I made one about a size 200 for my demonstrator jig from aluminum wire, I used a can for a form .Smaller ones could be made using dowels as a form and stainless wire . If not look for these guides on old surf rods for the size you are looking for, they are out there and can be found , good hunting and good luck ! Larry Re: 50mm double foot wire guide
Posted by:
Garrett Adams
(---.mia.bellsouth.net)
Date: February 09, 2011 02:12PM
BINGO Larry! Thanks.
I seached all over the internet and still can't find any. I'll keep trying. Hopefully I can find some on @#$%& some day. THANKS GARRETT Re: 50mm double foot wire guide
Posted by:
Tom Kirkman
(Moderator)
Date: February 09, 2011 08:53PM
Aetna Foulproofs were never made in a size 50 as far as I know. They're a very light duty guide - very good guides, but not meant for heavy duty rods. They were made from light Monel wire.
............. Re: 50mm double foot wire guide
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 09, 2011 11:38PM
See if the guy will go for an upgrade. Bill - willierods.com Re: 50mm double foot wire guide
Posted by:
Garrett Adams
(---.mia.bellsouth.net)
Date: March 29, 2011 10:24PM
EDIT.... i found a whole pile of 55mm ones on @#$%&.... way more than i need. Anyone need a few? Sorry, only registered users may post in this forum.
|