SPONSORS
2024 ICRBE EXPO |
Guide recommendations?
Posted by:
David Dosser
(---.columbus.res.rr.com)
Date: February 07, 2011 05:01PM
I am rebuilding a Fenwick HMXS 83ML and would like to know if someone has a good recommendation for replacement guides? Customer doesn't want anything real expensive, but also wants something similar to the factory single foot gold ring guides that it came with. Does anyone have an idea of what to use on this rod? It's a spinning rod 8' 3". Any help would be greatly appreciated. Thanks in advance.
David Dosser David Dosser Coshocton, OH Edited 1 time(s). Last edit at 02/07/2011 05:13PM by David Dosser. Re: Guide recommendations?
Posted by:
Joe Vanfossen
(---.neo.res.rr.com)
Date: February 07, 2011 05:35PM
Dave,
Does it have these guides? [www.jannsnetcraft.com] Other than those and possibly the Pac Bay minimas that are similar in design, I can't think of too many ceramic ring options that don't come in pretty expensive. Joe Re: Guide recommendations?
Posted by:
Dan Ertz
(---.dsl.airstreamcomm.net)
Date: February 07, 2011 05:47PM
A lot of the Fenwick rods come with Pac Bay guides. Maybe something in the SV series will match what he wants.
Dan Re: Guide recommendations?
Posted by:
David Dosser
(---.columbus.res.rr.com)
Date: February 07, 2011 06:22PM
The ones at jannsnetcraft look very similar. Those should work fine and I'm going to look at those Pac Bay guides again. Thanks for the help guys. David Dosser Coshocton, OH Re: Guide recommendations?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 07, 2011 06:29PM
The batson VS3 guides work very very well and are extremely tough.
[www.batsonenterprises.com] Roger Sorry, only registered users may post in this forum.
|