I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Wrapping Thread
Posted by: Ed Fontes (---.hsd1.ma.comcast.net)
Date: January 15, 2011 05:18PM

Since Gudebod went away for awhile I ran low on my supply so I like others searched for an alternate, I tried many different brands and was not satisfied. I have finally found a great thread and wish I used it before now, it is FishHawk, I use mostly metallics and this is by far the nicest thread to work with, no springing or twisting off the spool and it lays nice. Both my son and me agree that this will be our thread of choice from now on, incidentally I am using the "P" metallics

Options: ReplyQuote
Re: Wrapping Thread
Posted by: Jim Meallows (---.dhcp.oxfr.ma.charter.com)
Date: January 16, 2011 07:54AM

This is good info to know. I have been looking for good alternatives and this sounds like good thread

Options: ReplyQuote
Re: Wrapping Thread
Posted by: bill boettcher (---.dyn.optonline.net)
Date: January 16, 2011 10:25AM

I am finding that most or all of the New threads do not have any - stretch - in them. I liked the stretch ???

Bill - willierods.com

Options: ReplyQuote
Re: Wrapping Thread
Posted by: Scott D parsons (---.nc.res.rr.com)
Date: January 16, 2011 12:29PM

Ed,
Thank you for the kind words. We are very happy with the response we have had from the rod building community. We are very excited about our future and look forward to 2011.

Scott and Karen

Scott Parsons
919-900-8998
[www.roddancer.com]
[www.fishhawkthreads.com]

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster