SPONSORS
2024 ICRBE EXPO |
Re: Biting fingernails over epoxy
Posted by:
Bob Balcombe
(---.jax.centurytel.net)
Date: January 10, 2011 11:09PM
Gary, Acetone can be mixed with some Epoxy Finishes ( 3 eye drops per one Oz.) This will cause bubbles to burst while mixing. It will also thin the mixture. Down side cure time is increased by a couple of hours. Good Wraps Bob Re: Biting fingernails over epoxy
Posted by:
Christopher Tan
(203.116.20.---)
Date: January 11, 2011 09:08PM
Richard Steiner Wrote:
------------------------------------------------------- > So water has no affect on epoxy? i tried dripping some finish into a bowl of water.. i emptied out the water the following day and was left with a 'close to perfect' sphere of rod finish.. moreover, in Singapore, RH is pretty high, often ranging around 70%~90% (Garey knows how humid it is).. so i don't believe water or humidity has much effect, if any, on the curing of the finish. the ball of finish was discolored, though i am not sure if it was due to the water being dirty.. - Give a man a fish, he'll eat for a day.. Teach a man to fish, he'll be broke! Sorry, only registered users may post in this forum.
|