SPONSORS
2024 ICRBE EXPO |
fuji tips and guides needed
Posted by:
Charles Lechner
(---.bankofamerica.com)
Date: January 05, 2011 01:25PM
I have 3 Team Daiwa rods I need to fix, evidently the original Daiwa versions didn't hold up well and I can no longer find the tips and guides for these rods for sale.
I need 3 x SGPST-4.5/6, Gold finish SiC Ring Top - 4.5/64 Tube 6mm Ring 1 x SGPST-5/6, Gold finish SiC Ring Top - 5.0/64 Tube 6mm Ring 2 x SGNSG-6, Gold finish Silicon Carbide Ring Spinning/Casting Guide - Size 6 I have scanned a lot of web sites without any luck, so if you have these specific Fuji tips and guides for sale please let me know. Re: fuji tips and guides needed
Posted by:
woody osborne
(---.dhcp.spbg.sc.charter.com)
Date: January 05, 2011 01:59PM
check your email. Re: fuji tips and guides needed
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: January 05, 2011 02:44PM
Charles,
Whenever I get into a situation like this, I simply strip all of the guides off of the rod and replace the guide with a type that is of a matching color and appearance. That way, the rod will have a nice finished look and will be essentially the same as it was before. It is generally much easier to simply strip the guides off of a rod, and rewrap, than spending hours and hours of time and effort to find a few matching guides of a particular type. Roger Re: fuji tips and guides needed
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 05, 2011 02:51PM
talk to the owner and see if he go for that. Modern guides better performance ya know Bill - willierods.com Sorry, only registered users may post in this forum.
|