SPONSORS
2024 ICRBE EXPO |
Decal cover up help/opinions
Posted by:
kevin merritt
(---.hsd1.fl.comcast.net)
Date: December 23, 2010 01:06PM
I have been asked by someone who purchased a fairly large supply of closeout rods to cover up the factory label and replace with his(labels not made yet). This is a fairly big undertaking and I want to do this the fastest and least costly way possible. Obviously I could wrap over and place new label and refinish, but was wondering if I could get a label with a black background and the customer's info and simply apply and refinish. I have read the Electric Decal article and searched through the posts, seems like that is the way to go.
Any thoughts or ideas? Re: Decal cover up help/opinions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 23, 2010 01:32PM
Decal Connection - Mudhole makes decals also
Call either or both and see Bill - willierods.com Re: Decal cover up help/opinions
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: December 23, 2010 03:37PM
Maybe it's just me..... I wouldn't do this. Seems a tad "shady" covering up one label with another for ....... resale for work not done????? Re: Decal cover up help/opinions
Posted by:
John Britt
(---.tampabay.res.rr.com)
Date: December 23, 2010 03:51PM
Ken I was thinking the same thing very close to if it isn't fraud
John Re: Decal cover up help/opinions
Posted by:
Bill Eshelman
(---.neo.res.rr.com)
Date: December 23, 2010 04:09PM
I`m with Ken And John. It just doesn`t seem right.
Bill Ohio Rod Builders Canton, Ohio Re: Decal cover up help/opinions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 23, 2010 05:02PM
Don't do it Bill - willierods.com Re: Decal cover up help/opinions
Posted by:
kevin merritt
(---.hsd1.fl.comcast.net)
Date: December 23, 2010 07:37PM
No no no no! Not for resale! That was the first question I asked. This guy operates a charter business(4 boats) and wanted his name to cover the factory label. We're talking about 24 or 30 rods(big job to me).
I was asking about the best way to do this as he wants his charter logo and name on the rods. Should have said that! Edited 1 time(s). Last edit at 12/23/2010 07:38PM by kevin merritt. Re: Decal cover up help/opinions
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 23, 2010 08:06PM
Do it and make yourself - money - ! Bill - willierods.com Re: Decal cover up help/opinions
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 23, 2010 09:16PM
Kevin,
Very simple. Have a label made that will be dark and will cover all of the former label. If possible have the colors match the blank to be less obtrusive. Apply the label, Put on a coat of guide wrap, let dry and return the rods. If you have a drum dryer, you can do the entire job in a couple of hours. Roger Re: Decal cover up help/opinions
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: December 24, 2010 07:08AM
oh, ok........ better ;-)........ Make some $$ Re: Decal cover up help/opinions
Posted by:
David Spence
(---.ec.res.rr.com)
Date: December 24, 2010 02:48PM
Kevin-Color some finish with black pigment-brush over the area to be covered. When it's dry you can use a clear decal, which, in my opinion is more eye-pleasing. Sorry, only registered users may post in this forum.
|