SPONSORS
2024 ICRBE EXPO |
NCP thread question
Posted by:
kevin gross
(---.static.izoom.net)
Date: December 17, 2010 12:34AM
I just ordered a bunch of ProWrap NCP thread. Does the NCP mean i dont need a color preservative for it to keep the same color when i finish it with epoxy? Thanks for your help! Kevin Gross Many men will spend their whole life wondering if they made a difference. Marines dont have that problem - Ronald Regan Re: NCP thread question
Posted by:
Greg Weaver
(---.carolina.res.rr.com)
Date: December 17, 2010 01:12AM
Kevin, that is correct. With NCP thread, color preserver is not required. It may darken slightly, but It will keep it's solid color when finish is applied. Re: NCP thread question
Posted by:
Greg Weaver
(---.carolina.res.rr.com)
Date: December 17, 2010 01:12AM
Kevin, that is correct. With NCP thread, color preserver is not required. It may darken slightly, but It will keep it's solid color when finish is applied. Re: NCP thread question
Posted by:
Michael Blomme
(---.spkn.qwest.net)
Date: December 17, 2010 03:08AM
Kevin, I suggest you do a test wrap with the NCP thread and a nylon or polyester (Madeira) using CP and finish on the regular thread and only finish on the NCP thread. The NCP looks like you painted the rod and will not have the sparkle that the other threads will have. If you like the look of the NCP threads, then proceed to wrap your rod with it.
Mike Blomme Re: NCP thread question
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 17, 2010 08:36AM
Mike is correct. I myself like to use only regular nylon because it looks better
Don't worry about using CP on your threads. They will be strong !! Bill - willierods.com Re: NCP thread question
Posted by:
Herman Knott
(---.gci.net)
Date: December 17, 2010 03:56PM
I made a color rod. Wrapped each 1/4" wide X 2 and put CP on one a then just put Finnish on the rod and now i know exactly what im getting when finished.
Herman Alaska Re: NCP thread question
Posted by:
Paul Lindsey
(---.dsl.okcyok.swbell.net)
Date: December 17, 2010 04:25PM Re: NCP thread question
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: December 17, 2010 07:58PM
Yes, ProWrap is very nice thread. The color is consistent on the spool, ProWrap Size A is slightly thinner than Gudebrod Size A. The Size D is about the same diameter as Size C Sorry, only registered users may post in this forum.
|