SPONSORS
2024 ICRBE EXPO |
RodMaker Subscribers
Posted by:
Tom Kirkman
(Moderator)
Date: December 15, 2010 11:46AM
Those of you who have attended the RodMaker Reception at prior Expo events are aware of the large number of door prizes we award each year. The 2011 Reception will be no different.
Most companies make their door prize donations on that Friday during Expo set up, but a few commit earlier. Here’s a same sample of what’s on tap for this year: Renzetti Master Rod Lathe - Renzetti, Inc. Batson Wrapping Machine - Batson Enterprises RX Rod Blanks - Batson Enterprises Eco Wrapper - The Rod Shop 3 Dozen Reel Seats - Pacific Bay, Int. Full Complement Rod Building Tools (wrapper, dryer, etc.) - Okie Rod Building Tools SHX Rod Blanks - Bingham Enterprises Threadmaster Epoxy and Fishhawk Thread Kits - Roddancer Products LiquiGlass Epoxy Kits - Industrial Coatings Co. Fishing Rod - Seeker Rod Co. Guide to Thread Weaving - Jim Upton 3 Acrylic Barreled Reel Seats - Swampland Rods The above is just a sample of the items provided. By the time of the actual event, there will be roughly 150 door prizes in place and ready to give away. There is nothing to buy - I don’t charge anyone, anything. Everything is given away free, including the refreshments. The new location for the Reception will provide a tad more elbow room this year. We were just about beyond the fire code capacity at the hotel ballroom. [www.icrbe.com] ............... Edited 3 time(s). Last edit at 12/16/2010 03:48PM by Tom Kirkman. Re: RodMaker Subscribers
Posted by:
Herman Knott
(---.gci.net)
Date: December 15, 2010 03:49PM
Tom you are not making it any easier for us here in Alaska :) Re: RodMaker Subscribers
Posted by:
Tom Kirkman
(Moderator)
Date: December 15, 2010 08:20PM
I just added a couple more items.
............ Re: RodMaker Subscribers
Posted by:
Col Chaseling
(121.212.1.---)
Date: December 15, 2010 11:33PM
Nor for those of us in Australia!!!!!, maybe one day.
ESFNEM Col Re: RodMaker Subscribers
Posted by:
Steve Zayas
(---.nyc.res.rr.com)
Date: December 16, 2010 07:51AM
i cant wait for this event,I'm fairly new to building almost a year now. Its gonna be nice to see all the booths and different products on the market and meet other builders.I should learn a lot... Re: RodMaker Subscribers
Posted by:
Tom Kirkman
(Moderator)
Date: December 16, 2010 08:36AM
I just added a few more items.
.......... Re: RodMaker Subscribers
Posted by:
Bill Dunn
(---.dyn.centurytel.net)
Date: December 16, 2010 03:53PM
Hi
I am brand new to the forum and brand new to rod building and i am real excited about it. I found your site when i was looking for some material so i registered last night. When is the expo and where is it at. I think it would be great for me to attend. Thanks Re: RodMaker Subscribers
Posted by:
corky fleming
(---.hsd1.ga.comcast.net)
Date: December 17, 2010 12:53PM
I am looking to attending the Expo. I use to build custom rods about thirty years ago. I am looking to getting back into the trade at this time. I reliaze that there have been many advancement made in the past years and I am needing to get up with this. I am hoping that the Expo will help in this. Sorry, only registered users may post in this forum.
|