I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

ccs for Z-axis 4wt?
Posted by: Larry Damore (---.hsd1.il.comcast.net)
Date: November 12, 2010 09:11PM

Does anyone have the ccs for a sage 590-4 Z-axis? I got a buddy who might want a build but he wants to know how close it is to his XP.

Thanks
Larry

Options: ReplyQuote
Re: ccs for Z-axis 4wt?
Posted by: Eugene Moore (---.244.214.204.Dial1.StLouis1.Level3.net)
Date: November 13, 2010 10:10PM

Larry,
Sorry but didn't do any ccs data on either, but have cast both.
The XP is slightly faster in the tip.
The Z-axis is a little lighter.
Both damp quickly and are deadly accurate.
Casting both short and long feel very similar with the same line.
You might also look at the new VXP blanks. ( Feel like the XP originals, but not available in 2-piece )
The price is favorable too.

Eugene Moore

Options: ReplyQuote
Re: ccs for Z-axis 4wt?
Posted by: Jim Williams (---.br1.sho.az.frontiernet.net)
Date: November 16, 2010 11:23AM

Here is a database for CCS. do not know who is maintaing it....if anyone is. Also do not know it's accuracy. I made mistakes in my first attempts att CCS. Therefore if different people are posting this data....not sure how accurate the data itself might be.

But there are a lot of rods listed if you are looking for something.

[www.sexyloops.com]

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster