SPONSORS
2024 ICRBE EXPO |
EVA Split Grips
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: November 10, 2010 07:41PM
Hi Fella's..can anyone speak to the Quality of the Custom Rod Builder series of EVA foam split grips sold by Mudhole. Specifically item # RSG4T-EVA and RSG3T-EVA. Thanks in advance Guys...Cheers....Wayne Re: EVA Split Grips
Posted by:
Andrew Metzger
(199.117.182.---)
Date: November 10, 2010 10:27PM
Works well and looks good, can be easily trimmed down to size if they are too close together.
Two that I built using them. [www.rodbuilding.org] [www.rodbuilding.org] Re: EVA Split Grips
Posted by:
John M. Hernandez
(---.socal.res.rr.com)
Date: November 11, 2010 01:57PM
Have used several. As Andrew stated they work very well and look great with the trim rings.
tight lines, john Re: EVA Split Grips
Posted by:
wayne diduch
(---.cpe.net.cable.rogers.com)
Date: November 11, 2010 04:44PM
Andrew, John...Thanks for the heads up. They do look very good in Andrews Photos, thanks Andrew for posting!! most appreciated. Cheers Fella's....Wayne Sorry, only registered users may post in this forum.
|