SPONSORS
2024 ICRBE EXPO |
spatulas
Posted by:
Mark Clooten
(216.168.1.---)
Date: October 10, 2010 05:20PM
If I was going to try putting on epoxy with a spatula what type would I need and where would I get it? thanks. Re: spatulas
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: October 10, 2010 06:26PM
you can get them from several of the sponsors on the left. i have also picked up some with different shapes at some hobby shops. Re: spatulas
Posted by:
Mark Clooten
(216.168.1.---)
Date: October 10, 2010 06:42PM
Is one shape or size better than another?? Re: spatulas
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: October 11, 2010 01:26AM
Mark,
Volume 5, issue 5 has an article by Ralph O'Quinn, "Making and using a finishing spatula". Highly informative. I hope this helps. "It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain John in Wethersfield, CT Re: spatulas
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 11, 2010 02:23PM
Mark,
If you decide to go the spatula route to apply finish, I suggest that you do a bunch of testing and trying and learning on some old scrap blanks and tied up guides. I have gone the entire route from sable brushes to a dozen different spatulas of different types, shapes and materials. I have discarded all of them have gone back to the single use inexpensive throw away brush - simlar to the brushes that are packaged with flex coats in their finish kits. I have simply found that these inexpensive brushes work very well, never have to clean them since you only use them once. I also found that for myself, I just never got the finish applied the way that I liked it applied when I used a spatula, no matter how much I practiced and no matter how many different materials and shapes that I used. But, certainly pick up a few different one and try for yourself. Lots and lots of builders do use spatulas with great success. I just found that for myself, it simply wasnt't my tool of choice. Roger Sorry, only registered users may post in this forum.
|