SPONSORS
2024 ICRBE EXPO |
Australian Rod Crafter Magazine
Posted by:
Vani Soter
(---.eqmp1.cha.bigpond.net.au)
Date: October 06, 2010 01:28AM
Has anyone got a copy of the above mag from approx., 10 years ago. It was mostly written by Ian Miller and included recipes for various rod types. I had a copy but have misplaced it and now wish to build on of the recipes.
Please help. Re: Australian Rod Crafter Magazine
Posted by:
Charles Clayton
(---.ldcz2.ken.bigpond.net.au)
Date: October 06, 2010 03:04AM
I have it somewhere however most of then are on the Fuji website [www.fujitackle.com.au] Re: Australian Rod Crafter Magazine
Posted by:
David Boyle
(---.dsl.nsw.optusnet.com.au)
Date: October 07, 2010 07:39AM
I have it, you can email me.
That's what got me started. It came out closer to 20 years ago than 10!! Regards Dave Boyle www.threadcentral.net Re: Australian Rod Crafter Magazine
Posted by:
PAUL FANNON
(---.43.254.125.unassigned.soulaustralia.com.au)
Date: October 11, 2010 08:01AM
Hi Vani.
The Australian Rod Crafter, was published by, Modern Fishing Publication. National Advertising Manager, (per inside cover) (02) 93536666. There is an up to date DVD, available, from Frogleys Offshore. Hope this helps. Paul. I fish therefore I am. www.hookeduprods.com Re: Australian Rod Crafter Magazine
Posted by:
Tony Reoch
(---.rochd4.qld.optusnet.com.au)
Date: January 09, 2011 06:48PM
Hi Vani.
I'm guessing that the mag. you refer to had squillions of rod recipes. If that is the case it;ll have a surf recipe for MT7144 (old butterfield blank), so perhaps I could get a copy sometime. Regards, Tony Re: Australian Rod Crafter Magazine
Posted by:
Paul James Vonderwall
(---.pa.vic.optusnet.com.au)
Date: June 19, 2016 10:22PM
Hi guys I am after a copy of Australian rod
Crafter mag ian 'barra' miller does any one Have copy Re: Australian Rod Crafter Magazine
Posted by:
Paul James Vonderwall
(---.pa.vic.optusnet.com.au)
Date: June 19, 2016 10:22PM
Hi guys I am after a copy of Australian rod
Crafter mag ian 'barra' miller does any one Have copy Sorry, only registered users may post in this forum.
|