I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

thanks to ALL
Posted by: Thomas Kaufmann (---.hr.hr.cox.net)
Date: October 01, 2010 11:30PM

Guys,

I have to give Todd at Mudhole some serious props!!!! While I was loading my rods up in the back of the Tahoe from a recent trip, I somehow managed to break the top two inches off of my MHX SJ720. I emailed Todd asking what he would suggest doing with the blank (other than making reamers out of it) and he went WAY above and beyond and is sending me a replacement free of charge... I can't say how impressed I am with Todd as a person and a representitive of his company. For those of you who have yet to use any of the sponsors on the left, I have had similar outstanding experiences (not rod breakage just customer service) from all of our sponsors..

Just wanted to say thanks to ALL that have helped me out over the years!! (Tom, Karen, Bob, Todd, Lance, Bill, Scott and there are others that I am sure I have forgotten and I do apologize if you have been left out please understand it has not been taken for granted!!!)


Thanks,
Tom

Options: ReplyQuote
Re: thanks to ALL
Posted by: Joe Willsen (---.isp.broadviewnet.net)
Date: October 04, 2010 12:33PM

I have had nothing but good experience with the folks at Mudhole as well. Bob Makamey and Amber Dickerson are two names that stand out for me. They have given me nothing but good advice and never made me feel stupid for being a noobie.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster