SPONSORS
2024 ICRBE EXPO |
In out pattern
Posted by:
Jim Meallows
(---.dhcp.oxfr.ma.charter.com)
Date: September 26, 2010 08:16PM
Building my 3rd rod and need some help laying out the pattern. I would like to do an"in -out" pattern. Actually an in-, out+ pattern. I thought I understood the layout from Billy's book and I must have layed it out wrong because it just ended up looking like a big diamond. Not sure that finished photos will help but if anyone can help with the "template" of the layout or any step by step pictures that would really help.
Thanks Jim Re: In out pattern
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: September 27, 2010 08:32AM
Where's the pics? Re: In out pattern
Posted by:
Jerry Poindexter
(---.tx.res.rr.com)
Date: September 27, 2010 09:03AM
Unhiding your email will help w/ getting replies/attachments. Re: In out pattern
Posted by:
Jim Meallows
(---.bos.east.verizon.net)
Date: September 27, 2010 10:26AM
Billy Vivona Wrote:
------------------------------------------------------- > Where's the pics? Cut it off in frustration. Just looked like 1 big diamond Re: In out pattern
Posted by:
Jim Meallows
(---.bos.east.verizon.net)
Date: September 27, 2010 10:27AM
Jerry Poindexter Wrote:
------------------------------------------------------- > Unhiding your email will help w/ getting > replies/attachments. Sorry. Did not realize it was hidden. Just changed that in the controls Re: In out pattern
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: September 27, 2010 11:23AM
Post the pic in the photo gallery. If I s what it looks lik I'll be able to tell you what you did wrong. Re: In out pattern
Posted by:
Jim Meallows
(---.bos.east.verizon.net)
Date: September 27, 2010 01:10PM
I will have to try to find some similar pics as I don't have any and I cut it off last night
By the way I am registered here and it will not let me look at the pics....says I have to register. But I am and I am logged in. Must be just the way my luck is going lately Thanks anyways. I will let you know what happens when I try to re-do it Re: In out pattern
Posted by:
Chad Huderle
(---.static.twtelecom.net)
Date: September 27, 2010 01:31PM
This will explain what you need to do to see the pics...
[rodbuilding.org] Thanks, Chad Huderle Huderle Custom Rods Prior Lake, MN Re: In out pattern
Posted by:
Ron Flowers
(---.dsl.rcsntx.swbell.net)
Date: September 28, 2010 05:04AM
Jim, I had to register there also. Just use your same user name but different password. That password works on the forum. Basically change your password.....that one will work here on the forum. Ron Flowers Strike back with venom.......... Cobra Custom Rods Arlington, TX Re: In out pattern
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: September 28, 2010 06:57AM
If you had 2 diamonds with different colors and a star in the middle of one of the diamonds, then that is what the pattern is supposed to look like. I just VisualWRap'd it now. Re: In out pattern
Posted by:
Jim Meallows
(---.bos.east.verizon.net)
Date: September 28, 2010 02:12PM
Okay I registered so I could see the photos. Thanks for the advice there
Billy, I studied the pattern in your book and realized where I went wrong with my layout...I think. So last night I laid it out as 2 diamonds and started a practice wrap on a blank tube just to see if I had it right. Once I finish the practice wrap I will post a pic. It's messy because I am not packing as I just want to see if the layout and sequencing is correct. But yes, my layout basically looked like 2 diamonds side by side. The only thing is I would not call it a star in the middle of one of the diamonds as it's just one exposed thread I am glad you said what it looks like....that makes me feel like I am on the right track with this. My 1st attempt was with only 1 diamond so my layout was wrong Re: In out pattern
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: September 28, 2010 04:13PM
OK, I apologize, I was looking at the In- In- pattern when I made my last response. I went and VisualWRapped the pattern you are wrapping and posted it in the photo gallery here: [www.rodbuilding.org] That's what you should end up with. Plase post pics of the layout, thn after you made a couple of passes - do not pack, just snap th pic and post it or e-mail m directly and wait until I answer, this way you'r not wasting time if you ar going in the wrong direcion. Re: In out pattern
Posted by:
Jim Meallows
(---.dhcp.oxfr.ma.charter.com)
Date: September 28, 2010 09:25PM
I emailed the pics to you Sorry, only registered users may post in this forum.
|