SPONSORS
2024 ICRBE EXPO |
Tiger problem
Posted by:
Tommy Klimowich
(---.mycingular.net)
Date: September 23, 2010 09:16AM
Doing a tiger wrap on a build for my cousin and I think I might have a problem. Under is PAC bay cherry red & chrome. I planned on doing met red on top but after reading a lot of posts saying it's not a good idea to use met threads on top I'm not sure what I should do. Any color recommendations? Don't want to use black because my last tiger was way too dark. Re: Tiger problem
Posted by:
Bill Burkett
(---.prod-infinitum.com.mx)
Date: September 23, 2010 09:40AM
Best advise for tigers is to do a test wrap using several different combos and pick the one you like best. You can use metallic thread for the top. Re: Tiger problem
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 23, 2010 09:56AM
I have been playing with them I found out that white NCP in the base makes it POP over a white lacquer painted blank. regular white nylon with CP did not pop as much. Bill - willierods.com Re: Tiger problem
Posted by:
Tommy Klimowich
(---.mycingular.net)
Date: September 23, 2010 12:06PM
I forgot to mention I already have 2 coats on the base wrap. I'll give it a try with the met red and see how it looks. Re: Tiger problem
Posted by:
thad peach
(---.clt.bellsouth.net)
Date: September 23, 2010 05:40PM
I have done metallic red, blue, as well as Burgundy and all outcomes have been awesome. I tried silver didn't like it as well as the gold. I haven't tried green yet but it should work also. The red and blue metallics were my favorites though.
here is a link to the burgundy. [www.rodbuilding.org] Thad Dutchman's Creek Tackle Sorry, only registered users may post in this forum.
|