SPONSORS
2024 ICRBE EXPO |
what alcohol do u guys use in ur burners
Posted by:
mitchell read
(---.jetstream.xtra.co.nz)
Date: September 23, 2010 05:33AM
hay guys im wondering what u use in ur alcohol burners???
meths, isopropelene ,turps cheers guys Re: what alcohol do u guys use in ur burners
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: September 23, 2010 05:39AM
Denatured - only denatured Re: what alcohol do u guys use in ur burners
Posted by:
mitchell read
(---.jetstream.xtra.co.nz)
Date: September 23, 2010 06:04AM
sweet i think it is the same as methylated spirits Re: what alcohol do u guys use in ur burners
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: September 23, 2010 06:56AM
Correct:
Denatured alcohol (or methylated spirits) is ethanol that has additives to make it more poisonous or unpalatable, and thus, undrinkable. In some cases it is also dyed. Denatured alcohol is used as a solvent and as fuel for spirit burners and camping stoves. Because of the diversity of industrial uses for denatured alcohol, hundreds of additives and denaturing methods have been used. Traditionally, the main additive is 10% methanol, giving rise to the term 'methylated spirit' Re: what alcohol do u guys use in ur burners
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: September 23, 2010 10:01AM
I USE 97%. The lower the percent means mre water and causes the burner to spit. Good Wraps Bob Re: what alcohol do u guys use in ur burners
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 23, 2010 11:51AM
Mitchell,
Go to your hardware or big box store to the paint department and get alchol from there. It is the 97% variety and will burn with a colorless flame that is soot free. If you buy alchol from the drug store it will only be 70% and it will burn with a yellow, sooty flame and sometimes not burn well at all. Take care REW Re: what alcohol do u guys use in ur burners
Posted by:
mitchell read
(---.jetstream.xtra.co.nz)
Date: September 23, 2010 03:31PM
ok cool cheers guys i have got some Isopropyl alcohol witch is some ware around 90-99 percent so i might use that i just dident know if i should or not with such a high content Re: what alcohol do u guys use in ur burners
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: September 23, 2010 05:44PM
Since I no longer drink, I use Johnny Walker Black. Rolly Beenen Rovic Custom Rods Re: what alcohol do u guys use in ur burners
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 24, 2010 03:35PM
Not to be a pain - but why even use a burner ??? Bill - willierods.com Re: what alcohol do u guys use in ur burners
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: September 27, 2010 08:45PM
bill boettcher Wrote:
------------------------------------------------------- > Not to be a pain - but why even use a burner ??? I like to warm my wraps up a bit so they'll drip a little more allowing me to pull as much finish off at the bottom as I can for a really thin and lightweight wrap. Sorry, only registered users may post in this forum.
|