SPONSORS
2024 ICRBE EXPO |
IMX guides
Posted by:
chip gennaro
(---.jan.bellsouth.net)
Date: September 22, 2010 12:52PM
Does anyone know what brand and type of guides were used on a 2- 3 year old Loomis IMX's
Thanks in Advance, Chip Re: IMX guides
Posted by:
Jim Gamble
(97.106.17.---)
Date: September 22, 2010 07:44PM
Fuji Alconite. Re: IMX guides
Posted by:
Michael Sledden
(---.176.42.254.ptr.us.xo.net)
Date: September 23, 2010 07:34AM
If you are replacing guides, you can get in touch with G-Loomis and they use to send you out the guides. They told me they wold rather give a rod builder the guides to repair it instead of having the rod sent in. You just need to make sure you describe the guide to them to make sure you get the correct one. Re: IMX guides
Posted by:
chip gennaro
(---.cpe.cableone.net)
Date: September 23, 2010 11:05AM
Thanks guys, i have one that the tip is missing. I will try and contact them or just order a new one.
Thanks again, Chip Re: IMX guides
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 23, 2010 11:53AM
Chip,
If it is the tip only, you can actually use one of many different tips and have a reasonably good match. Just get the right size and color and it will look fine. Of course the exact correct matching tip is nice. Roger Sorry, only registered users may post in this forum.
|