SPONSORS
2024 ICRBE EXPO |
after lumiseal how long before I can start the wrapping process
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: September 20, 2010 10:41PM
I just finished my rod with Lumiseal, How long should i wait till I can start wrapping the guides? Re: after lumiseal how long before I can start the wrapping process
Posted by:
Scott D parsons
(205.244.119.---)
Date: September 21, 2010 07:43AM
Lorenzo,
I would wait 24 hrs. I hope it turned out like you wanted it to. Thanks for using our products. Scott Parsons Scott Parsons 919-900-8998 [www.roddancer.com] [www.fishhawkthreads.com] Re: after lumiseal how long before I can start the wrapping process
Posted by:
Bill Napier
(---.208.88.219.rdns.vpslime.com)
Date: September 22, 2010 09:13AM
Whoa! Having done this I would say to wait a full WEEK before wrapping on a Lumaseal surface. If you wrap too soon the thread will tend to dig in to the finish and you will not be able to burnish it. If you remove it you will see ridges left by the thread indentations into the surface. You need to let the coating get really hard before wrapping. Sorry, only registered users may post in this forum.
|