SPONSORS
2024 ICRBE EXPO |
Interchangable reel seat parts
Posted by:
Peter G. Douma
(---.nwrknj.fios.verizon.net)
Date: September 10, 2010 06:49PM
Does anyone know, if different hoods from reel seats will go together. For example I have amtak, fuji, and pac bay hoods I took off broken rods' reel seats. Will these parts go together. Could I put a fuji hood on an amtak seat, etc.? Peter Douma Poseidon Custom Rods N.E.R.B.s Re: Interchangable reel seat parts
Posted by:
Phil Erickson
(---.dsl.sfldmi.sbcglobal.net)
Date: September 10, 2010 07:03PM
You will need to test for yourself. The diameters may be different even within the same manufacturers line. Re: Interchangable reel seat parts
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: September 10, 2010 07:20PM
like Phil said, just check each one. sometimes they can work and other times not depending on the seat and model involved. Re: Interchangable reel seat parts
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 11, 2010 01:13PM
Peter,
Many times they will interchange, but sometimes they won't. Just take potential swap parts and try them for yourself. Take care Roger Re: Interchangable reel seat parts
Posted by:
Peter G. Douma
(---.nwrknj.fios.verizon.net)
Date: September 11, 2010 02:12PM
Thanks Guys,
I know i am going to check my self. All I have left is big seats, and i am going t order a bunch soon, Just wanted toknow if I had to order all 3 brands. Peter Douma Poseidon Custom Rods N.E.R.B.s Re: Interchangable reel seat parts
Posted by:
John M. Hernandez
(---.socal.res.rr.com)
Date: September 11, 2010 03:32PM
Peter,
I have interchanged the various parts from different manufactures, as stated by Phil they can and do vary in diameter. For the mst part though they do mix well. Tight lines, JH Sorry, only registered users may post in this forum.
|