SPONSORS
2024 ICRBE EXPO |
metallic glow thread
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: September 09, 2010 11:30AM
Has anyone tried the metallic glow thread, I have just bought some Pearl Blue metallic Glow thread, and would like to know if anyone has tried this thread and how it turned out. Re: metallic glow thread
Posted by:
JEREMY FISHER
(---.dhcp.embarqhsd.net)
Date: September 09, 2010 11:54AM
I have used the light blue and it looks good. It will glow for about 2 hours after removed from the light. I only used it on the butt and I am unsure what it would do on guides. Re: metallic glow thread
Posted by:
Peter G. Douma
(---.nwrknj.fios.verizon.net)
Date: September 09, 2010 12:05PM
I was just looking at it in my wholesale catalog. I have heard good things about it though. I was thinking about wrapping, the tops of chunking rods, so i could see them in the dark easy. Peter Douma Poseidon Custom Rods N.E.R.B.s Edited 2 time(s). Last edit at 09/09/2010 12:06PM by Peter Douma. Re: metallic glow thread
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: September 09, 2010 12:49PM
If you want persistence ... well glow thread (as above) lasts about 2 hrs. Depending on the rod tip diameter you might want to think about a wrap on Breakaway tip light. I regularly put them on surf rods for guys who fish at dusk into the night. They're bright and will last through several trips before the battery needs to be replaced. Re: metallic glow thread
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: September 09, 2010 07:24PM
I used the FishHawk metallic "Brilliance" #005 yellow for a display weave I did last week. I was quite pleasently surprised. Photo was posted on the photo board.
[www.rodbuilding.org] I'm working on a couple other decorative ideas using "glow" threads and I just completed a weave that this is perfect for! Stay Tuned Raymond Adams Eventually, all things merge, and a river runs through it.. Sorry, only registered users may post in this forum.
|