SPONSORS
2024 ICRBE EXPO |
lumiseal over laquer
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: September 03, 2010 10:10AM
Does anyone know if Laquer paint job on a rod will hold up to Lumiseal? Iv'e painted 2 rods with a ready to spray laquer Dupli-color paint, and want to put a coat of Lumiseal. Re: lumiseal over laquer
Posted by:
Peter Sprague
(69.162.116.---)
Date: September 03, 2010 10:55AM
Not sure I would rely upon somebody elses opinion or experience on this one. You might ruin your paint job. There is only one sure fire way to find out.......try it! Put some of your paint on a scrap stick, let it dry, and then apply the Lumaseal over it. That was you will know for SURE what will happen. Re: lumiseal over laquer
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 03, 2010 11:00AM
I do it a lot with Dupli color and it works fine Be quick Bill - willierods.com Re: lumiseal over laquer
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: September 03, 2010 11:49AM
Thank you all, I hope it does work fine, cause one of them rods is a friend of mine, say a prayer for us! Re: lumiseal over laquer
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: September 03, 2010 11:49AM
Thank you all, I hope it does work fine, cause one of them rods is a friend of mine, say a prayer for us! Re: lumiseal over laquer
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 03, 2010 01:05PM
There is a learning curve to using Permagloss and LumiSeal. You should play on scrap if this is the first time. Bill - willierods.com Re: lumiseal over laquer
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 03, 2010 01:05PM
There is a learning curve to using Permagloss and LumiSeal. You should play on scrap if this is the first time. Bill - willierods.com Re: lumiseal over laquer
Posted by:
Peter G. Douma
(---.nwrknj.fios.verizon.net)
Date: September 04, 2010 05:13PM
I had it take off writing before, did you put clear coat over the paint? Re: lumiseal over laquer
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 04, 2010 05:22PM
With writing on a blank I put CP on the writing Let dry overnight then clear. Bill - willierods.com Sorry, only registered users may post in this forum.
|