SPONSORS
2024 ICRBE EXPO |
Need Paciific Bay Guide
Posted by:
Jon Schrock
(---.cinci.res.rr.com)
Date: August 08, 2010 07:23PM
I am repairing a Kistler rod for and I need a Pacific bay size 10 fly guide. Do any of the Sponsors carry this guide ? If not does anyone know where I can purchase one. Thank You, Jon Re: Need Paciific Bay Guide
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: August 08, 2010 10:22PM
Pacific Bay is a sponsor here. They are listed on the left. At the top of their page they list "where to buy" - at least three of the other sponsors of this board are listed a distributors of PAC BAY == take your pick Re: Need Paciific Bay Guide
Posted by:
Tom Kirkman
(Moderator)
Date: August 09, 2010 09:33AM
Jon,
Take Ken's advice and write or call them. Most of the sponsors are very busy and don't have time to monitor this forum on an hourly, if even daily, basis. They might never see your post here. .......... Re: Need Paciific Bay Guide
Posted by:
BobMcKamey
(---.se.biz.rr.com)
Date: August 09, 2010 11:34AM
Jon -- Need a little more info and might possibly be able to help you. What color is the finish on the frame and what is the ring color? Bob McKamey bobm@mudhole.com Re: Need Paciific Bay Guide
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 09, 2010 04:27PM
Jon
Look at the guides offered 0n Mud Hole with guide - in hand - match it up Bill - willierods.com Re: Need Paciific Bay Guide
Posted by:
Jon Schrock
(---.cinci.res.rr.com)
Date: August 09, 2010 05:30PM
Thank you for the help everyone. I found the guide I needed at Mud Hole on line. It wasn't listed in then the catalog. Sorry, only registered users may post in this forum.
|