I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pitching rod blank suggestion
Posted by: Mike Canavan (---.nys.biz.rr.com)
Date: August 06, 2010 04:39PM

First time build for this style rod, I searched the archives, but little luck: I'm looking for a recommendation for a fantastic Pitching rod blank, 7', heavy power, 3/8 -1/2oz lures, with a bit of tip flex. All recommendations very much appreciated - Many, many Thanks!!!

Options: ReplyQuote
Re: Pitching rod blank suggestion
Posted by: BobMcKamey (---.se.biz.rr.com)
Date: August 06, 2010 04:53PM

MB844 MHX

Bob McKamey
bobm@mudhole.com

Options: ReplyQuote
Re: Pitching rod blank suggestion
Posted by: Mike Canavan (---.nys.biz.rr.com)
Date: August 06, 2010 05:11PM

Wonderful blank Bob, thank you! Dumb me never thought of it - actually I just built a couple of these blanks up spiral-wrapped for jigging lake trout.

Options: ReplyQuote
Re: Pitching rod blank suggestion
Posted by: Bill Stevens (---.br.br.cox.net)
Date: August 06, 2010 05:37PM

Sure do like the two letters, MB, and the three numbers, 844, listed above.

Slide an XP3 in front of the MB 844.

Micro it out and you will be blown away!

[www.swamplandtackle.com]

Bob!

It is time for you to go play! Apple For Me Please!

Options: ReplyQuote
Re: Pitching rod blank suggestion
Posted by: Todd Badgley (---.hsd1.tn.comcast.net)
Date: August 06, 2010 07:03PM

Is it Duck River time?

Options: ReplyQuote
Re: Pitching rod blank suggestion
Posted by: Bill Stevens (---.br.br.cox.net)
Date: August 07, 2010 08:55AM

For the fortunate ones who attended the last "Thunder Roll" at the Duck it is ALWAYS TIME!

The sky was lit up with Electricity!

The bellies were filled with vittles!

Feet were stomping to the tune of The Bro's Harmonica and Fiddle!

The lures and lies were sailing in the air - completely over the heads of some!

We can all dream of setting the hook again!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster