SPONSORS
2024 ICRBE EXPO |
quick question on CP use
Posted by:
Bill Jovanovski
(---.bfcz1.lon.bigpond.net.au)
Date: July 23, 2010 09:56PM
Im using non NCP Gudebrod A on a rod that Im building and I plan to use CP on the thread. If I do use CP , im guessing the expoxy wont be able to penetrate the thread for maximum strength. Am I correct in saying this. Edited 1 time(s). Last edit at 07/23/2010 10:29PM by Bill Jovanovski. Re: quick question of CP
Posted by:
Ed Kindervater
(---.rcmdva.fios.verizon.net)
Date: July 23, 2010 10:01PM
Yes. Re: quick question on CP use
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: July 23, 2010 10:43PM
Many of us use CP on guide wraps all the time. It's not a problem at all. Re: quick question on CP use
Posted by:
Bill Jovanovski
(---.bfcz1.lon.bigpond.net.au)
Date: July 24, 2010 02:04AM
Thanks. Re: quick question on CP use
Posted by:
Tom Kirkman
(Moderator)
Date: July 24, 2010 05:17AM
The difference in strength is only slight. Wraps made with CP are not inherently weak or anything at all like that. Go ahead and use it, you'll be fine.
............... Sorry, only registered users may post in this forum.
|