SPONSORS
2024 ICRBE EXPO |
reel seat hood removal
Posted by:
Walt Davenport
(---.pikeville.ky.cebridge.net)
Date: July 06, 2010 10:43PM
Is it possible to take a hood off the lock nut on a reel seat? I've never tried but it seems possible to me; I've got a painted reel seat that I want to change from silver to gold hood. Thanks! Walt Davenport "Roadhouse Rods" Edited 1 time(s). Last edit at 07/06/2010 10:44PM by Walt Davenport. Re: reel seat hood removal
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: July 07, 2010 12:06AM
Yes, but it will have to be the same brand and maybe model to replace it.
Might be easier to buy another seat with the hood color you want and just switch the whole locknut/hood. Re: reel seat hood removal
Posted by:
Tom Kirkman
(Moderator)
Date: July 07, 2010 08:26AM
We covered this in RodMaker awhile back. It can be done and replaced with another color from the same model, but the process, while simple, must be quick and definite otherwise you risk cracking the rim that holds the hood.
........... Re: reel seat hood removal
Posted by:
Thomas Kaufmann
(---.nmci.navy.mil)
Date: July 07, 2010 11:26AM
Tom,
What issue of Rodmaker was that in? thanks, Tom Re: reel seat hood removal
Posted by:
Tom Kirkman
(Moderator)
Date: July 07, 2010 11:37AM
I'll have to take some time and go back and look. It was all about modifying the standard nylon/graphite type seats by mixing and matching parts. I think it was one of the Volume 5 issues.
.............. Re: reel seat hood removal
Posted by:
Thomas Kaufmann
(---.nmci.navy.mil)
Date: July 08, 2010 10:02AM
Tom,
do you stil have these available for purchase?? I think I could figure it out but if someone has already done the leg work and it keeps me from trashing seats I will definately spend the $$ to save me the heartache. Tom Re: reel seat hood removal
Posted by:
Tom Kirkman
(Moderator)
Date: July 08, 2010 11:50AM
I'll have to look. I'm sort of tied up today and tomorrow but if you'll email me I'll file it and come back to it next week. I plan to clean out some older back issues so I'll try to remember to look for it.
.............. Re: reel seat hood removal
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: July 18, 2010 04:52PM
I am also interested in how to do this. Sorry, only registered users may post in this forum.
|