SPONSORS
2024 ICRBE EXPO |
Fitting eva grip
Posted by:
Bruce Kemp
(---.153.8.171.Dial1.Atlanta1.Level3.net)
Date: June 11, 2010 08:18PM
12in. grip tapers from .725-.790.Will 3/4 with rod bond be tight enough on the smallend?If not will 5/8 stretch enough for the big end or do I need to drill 5/8 to about 11/16? Re: Fitting eva grip
Posted by:
Tom Kirkman
(Moderator)
Date: June 11, 2010 08:31PM
Yes. You should be fine.
Read the FAQs page for more information on installing EVA grips. .......... Re: Fitting eva grip
Posted by:
Bruce Kemp
(---.153.8.171.Dial1.Atlanta1.Level3.net)
Date: June 11, 2010 08:54PM
Thans Tom.If it will stretch1.2-1.5 times the id the 5/8 should be about perfect .All Ive used so far is cork so Im stepping out a little. Re: Fitting eva grip
Posted by:
Tom Kirkman
(Moderator)
Date: June 11, 2010 09:31PM
The 3/4 may well be fine if you install it as outlined on the FAQs page.
............. Re: Fitting eva grip
Posted by:
Ted Meehan
(---.mia.bellsouth.net)
Date: June 25, 2010 03:01PM
What is the best way to cut a tendon on a eva grip. I have heard to use mono line. Sorry, only registered users may post in this forum.
|