SPONSORS
2024 ICRBE EXPO |
Lamiglas blanks
Posted by:
Brett Hinson
(---.nc.res.rr.com)
Date: June 10, 2010 02:46PM
Has anyone used the Excel bass blanks? I have on several occasions used them and everytime I have to send them back.The finsh has bubbles in it and the finish is speckled.
I have contacted Lamiglas and they replace it. My suppler had 5 of the blanks and all of them had defects in the finish.Has anyone else had this problem? Am I being to picky? For what they cost they should be perfect. Edited 1 time(s). Last edit at 06/10/2010 04:06PM by Brett Hinson. Re: Lamiglas blanks
Posted by:
Tom Kirkman
(Moderator)
Date: June 10, 2010 03:32PM
A bad batch might have slipped out somehow. It's not the norm.
........... Re: Lamiglas blanks
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 10, 2010 10:01PM
They are not the only game in town , try another company Bill - willierods.com Re: Lamiglas blanks
Posted by:
Timothy Johnson
(---.37.155.40.adsl.snet.net)
Date: June 11, 2010 05:51PM
I used one a few months back and the finish was very nice. It wasn't too long after they first came out. Re: Lamiglas blanks
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: June 12, 2010 12:09AM
If you have a problem, Contact Josh or Kindra at Lamiglas. They want to know of any problems. So they can correct all problems. I have never ran in to a blank finish problem. Can you be more specific? Good Wraps Bob Re: Lamiglas blanks
Posted by:
Brett Hinson
(---.nc.res.rr.com)
Date: June 12, 2010 10:52AM
Bob I called Lamaglas and spoke with someone about the finish they said thank you and offered to send a new blank.Just didnt convince me that he cared . I could be wrong on that.
The finish was speckled for 4 inches down from the tip and the color faded from copper to a greenish copper color.This was the second one in the Excel series that the finish wasnt right.The first onehad 4 or 5 blisters in the finish. I like the blanks and will use them again if they can get the finish right. Re: Lamiglas blanks
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: June 12, 2010 02:03PM
Brett. Email me at balcomberods@aol.com I may have a answer or a way to clear up your problem. I have not a clue who you talked to. I have been dealing with Lamiglas for over 30 years and they do care about their product Good Wraps Bob Re: Lamiglas blanks
Posted by:
Ed Fontes
(---.hsd1.ma.comcast.net)
Date: June 13, 2010 08:55PM
Hi Brett
I too have had several problems with Lamiglas, not with finished rods but with blanks. I get the same feeling as you when I talk to them, "just send it back and we'll check it out" so now I have bought the blank or blanks, built the rods and spent alot of time and money, now I have to pay to send the blanks back, you are right they are top money and we should expect top quality BEFORE it leaves the factory. Ed Re: Lamiglas blanks
Posted by:
Bob Balcombe
(---.rb.gh.centurytel.net)
Date: June 14, 2010 02:57AM
Ed Who did you talk to? Ask for Josh or Kindra Good Wraps Bob Sorry, only registered users may post in this forum.
|