SPONSORS
2024 ICRBE EXPO |
what is your favorite burnishing
Posted by:
Anonymous User
(---.dhcp.stpt.wi.charter.com)
Date: April 30, 2010 12:25PM
I curious what is your favorite burnishing to flat smooth the wrap plastic, metal, anythings i want to find a other way to brunsihing wrap ?
Josh Re: what is your favorite burnishing
Posted by:
Trinity Lindseth
(---.redlake.k12.mn.us)
Date: April 30, 2010 12:32PM
I use a probe from a biology class for disecting. It has a nice curve and angle to it that I like... Re: what is your favorite burnishing
Posted by:
Walker_Nelson
(69.198.19.---)
Date: April 30, 2010 02:01PM
I use a circuit tester for fuses..Small with a little handle..I hit it with steel wool to dull the point and create a super smooth surface...Great for burnishing and packing trim bands,and decro wraps Re: what is your favorite burnishing
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 30, 2010 03:48PM
Josh,
Basically any thing that is very smooth, has a bit of a dull point, and is made of a material that will not leave any residue behind from the tool. Take care Roger Re: what is your favorite burnishing
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: May 01, 2010 08:02AM
I use a "true" burnishing tool that was made to burnish dry transfer lettering, also some small crochet needles which I filed and polished to a fine smooth point, good for micro guides. Re: what is your favorite burnishing
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: May 01, 2010 04:13PM
I use a hard wood Chinese Chop stick that has a hard finish. I can modify it to what I need. My wife has to spank my hands when We go out for Chinese food or any Oriental food. I once tried to get a set of Ivory ones once. That did not go will with the restaurant. No they were not plastic they were the real thing :)) Good Wraps Bob Re: what is your favorite burnishing
Posted by:
Jeff Seabridge
(---.cmdnnj.fios.verizon.net)
Date: May 01, 2010 06:34PM
A nail clipper. Has worked for me for quite a few years Re: what is your favorite burnishing
Posted by:
Anonymous User
(---.dhcp.stpt.wi.charter.com)
Date: May 02, 2010 11:23AM
thank for reply of your favor burnishing so now i can find somethings that will always work .. i think nail clipper and maybe a craft needle and that give me some idea .. it always will save me few dollar than order a burnishing from rod building supplies but i'm thinking of E B A Y might has more for cheaper...
thanks alot Josh Re: what is your favorite burnishing
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: May 02, 2010 01:50PM
I also use dental tools and artist spatulas, At one time Trondak - U40 had some cool burnishing stainless steel burnishers Over the years builders use different tool not even associated with rod building. So let your imagination be your guide Good Wraps Bob Sorry, only registered users may post in this forum.
|