SPONSORS
2024 ICRBE EXPO |
Thread color recommendations
Posted by:
David Page
(---.185.29.71.dynamic.ip.windstream.net)
Date: April 14, 2010 07:53PM
I'm having trouble coming up with a thread color to use on a rod. The blank is black, carbon fiber handle with blue trim rings and checks. I want to use blue metallic as a trim band but can't come up with a main color that'll good with this. Any ideas? David Page E-town, KY. Re: Thread color recommendations
Posted by:
Jay Weissler
(---.dsl.emhril.sbcglobal.net)
Date: April 14, 2010 07:59PM
you might try black or a gray Re: Thread color recommendations
Posted by:
Ben Hutton
(---.client.mchsi.com)
Date: April 14, 2010 10:29PM
I agree that black or gray would look good with a metallic blue trim. Black w/ blue trim will match the color scheme of your grip and trim rings. However, you might want to consider using blue as your main wrap and then use a silver or white trim band. Re: Thread color recommendations
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 15, 2010 08:38AM
Even as Ben said but with the HT white pearl as trim Bill - willierods.com Re: Thread color recommendations
Posted by:
Walker_Nelson
(69.198.19.---)
Date: April 15, 2010 10:24AM
I think the black main and blue trim will flow nicely with the carbon grips and blue checks Re: Thread color recommendations
Posted by:
David Page
(---.185.29.71.dynamic.ip.windstream.net)
Date: April 15, 2010 10:45PM
I appreciate the help guys. I did a bunch of test wraps on a scrap rod and medium gray no CP with a blue trim is the choice. David Page E-town, KY. Sorry, only registered users may post in this forum.
|