SPONSORS
2024 ICRBE EXPO |
glueing cork to EVA
Posted by:
Don Baker
(138.230.250.---)
Date: March 24, 2010 01:46AM
What's the best way to glue cork to EVA? I use epoxy for cork and contact cement for foam but don't know which will work for cork to foam. Re: glueing cork to EVA
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 24, 2010 07:52AM
THey both work, provided teh cork has a smooth surface on the edge and you apply 2 coats and let it dry properly. I glue cork together with contact cement all the time, if done properly there is no problem, but it's def not as fool proof as epoxy. The problem with epoxy & EVA is on an EVA-EVA bond, there is a hard seam. With cork-eva there is no hard seam because cork is hard. Sorry, only registered users may post in this forum.
|