SPONSORS
2024 ICRBE EXPO |
Carbon Fiber Foam Core Splits Grips
Posted by:
Jay Burns
(---.excelsior.edu)
Date: March 12, 2010 12:04PM
Love the Foam Core Carbon Fiber grips, I am building a crankbaiting rod, would like to know where to get for building a blank with a split grip. How are they ordered, I like the carbon fiber sleeving, any info on where to order a set of split grips and a butt end if possible would be great. Edited 1 time(s). Last edit at 03/12/2010 12:05PM by Jay Burns. Re: Carbon Fiber Foam Core Splits Grips
Posted by:
Michael Sledden
(---.176.42.254.ptr.us.xo.net)
Date: March 12, 2010 12:36PM
They are not a purchased item, guys make those grips. Re: Carbon Fiber Foam Core Splits Grips
Posted by:
Tom Bittick
(---.wcht.ks.pixius.net)
Date: March 12, 2010 12:48PM
Give Scott from rod dancer (and about a dozen other places)a shout. Re: Carbon Fiber Foam Core Splits Grips
Posted by:
Scott Parsons
(---.nc.res.rr.com)
Date: March 12, 2010 01:12PM
Jay, Give me a shout, I will see if I can help you out
Scott Parsons Re: Carbon Fiber Foam Core Splits Grips
Posted by:
Tom Bittick
(---.wcht.ks.pixius.net)
Date: March 12, 2010 01:31PM
Yep that's Scott I was talking about. Re: Carbon Fiber Foam Core Splits Grips
Posted by:
Fred Cory
(---.cisco.com)
Date: March 12, 2010 04:16PM
Give Mike a call at Riley Rods - They have all of the sleeving, epoxy, foam and blanks as well [www.rileyrods.com] Sorry, only registered users may post in this forum.
|