SPONSORS
2024 ICRBE EXPO |
reverse spade bit reamer
Posted by:
Jay Weissler
(---.dsl.emhril.sbcglobal.net)
Date: March 10, 2010 08:16PM
Anyone have the directions for how to grind the back of the bit? how did it work out for you?
thx Jay Re: reverse spade bit reamer
Posted by:
Tom Kirkman
(Moderator)
Date: March 10, 2010 08:25PM
RodMaker Volume 9 #5. They work great. Cut cork like butter.
.............. Re: reverse spade bit reamer
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 10, 2010 09:33PM
I have to agree with Tom. Wonderful directions and they work very well.
I picked up a set of long shafted bits, made the grinds to the bits and they all cut wonderfully well. Take care Roger Re: reverse spade bit reamer
Posted by:
Les Stewart
(---.rh1.dyn.cm.comporium.net)
Date: March 13, 2010 08:20PM
I do not have that issue, could somebody please explain why you would need reverse spade bits? Re: reverse spade bit reamer
Posted by:
Tom Kirkman
(Moderator)
Date: March 13, 2010 09:55PM
So you can ream/bore a cork grip to any size you want in about 5 seconds.
.............. Sorry, only registered users may post in this forum.
|