SPONSORS
2024 ICRBE EXPO |
Wrapping Spigot Ferrules
Posted by:
Scott Grady
(---.applwi.dedicated.static.tds.net)
Date: March 09, 2010 12:56PM
I have a 3 pc McFarland glass blank with spigot type ferrules. I was wondering if I should put a wrap on the blank on the male and female side?
Scott Re: Wrapping Spigot Ferrules
Posted by:
Tom Kirkman
(Moderator)
Date: March 09, 2010 01:03PM
Yes. Short and snug. Get the wrap right up close to the edge.
............ Sorry, only registered users may post in this forum.
|