SPONSORS
2024 ICRBE EXPO |
Logo on the Butt Cap
Posted by:
Jay Burns
(---.nycap.res.rr.com)
Date: February 28, 2010 09:39AM
Tried to research this topic and would love to add a logo to my butt cap. How do I do this? What butt cap works best - do I epoxy over the decal Re: Logo on the Butt Cap
Posted by:
Victor Heal
(---.gdrpmi.dsl-w.verizon.net)
Date: February 28, 2010 10:15AM
Do a search on decals on here. The principle is the same. Re: Logo on the Butt Cap
Posted by:
Torin Koski
(---.hsd1.co.comcast.net)
Date: February 28, 2010 12:22PM
You would definately want to epoxy over your logo if it's applied via decal. You could also have a metal butt cap engraved, but that would probably be fairly expensive. I usually reak havoc to my butt caps, so I can't personally see doing this. Re: Logo on the Butt Cap
Posted by:
Jeremy Wagner
(---.dhcp.embarqhsd.net)
Date: February 28, 2010 06:27PM
Mudhole can laser engrave your logo on a buttcap. Not too expensive either.
Todd can tell you when their laser engraver is ready to go. jeremy Re: Logo on the Butt Cap
Posted by:
Jason Cosby
(---.sub-75-205-91.myvzw.com)
Date: March 05, 2010 06:03PM
I just got my shipment of lapel pins in for this purpose. I got them from Lapel Pins R Us for $2.60 each in a 1/2" size without pins or dammits. They don't show the 1/2" size, but they'll make them if you ask. They'll draw up whatever you are seeking as many times as necessary until you're satisfied with the result, so I saw it as a great value with the included artist services. All you need is a butt cap that can be drilled for a 1/2" inlay and epoxy it in. Sorry, only registered users may post in this forum.
|