SPONSORS
2024 ICRBE EXPO |
New issue of RM
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: February 09, 2010 08:52PM
Hey guys this new issue of RM has lots cool hints. I liked the one about how to install a removable Butt Cape. for years I always put important info. into the Butt section. Them glued the cap on. Well when it came to removing the cap, the cap always got damaged or glue got on the info. I had placed in the hollow Butt end. This system eliminates the glue problem. Bill Colby thanks for sharing Good Wraps Bob Re: New issue of RM
Posted by:
Bill Colby
(---.charlotte-15rh16rt-16rh15rt.nc.dial-access.att.net)
Date: February 09, 2010 09:38PM
I'm glad you found it helpful. I thought it would be something that some would find very useful.
In the interest of fairness I want to metion that Tom edited the article and took out a bit of credit I gave him for the idea. Maybe he did it for space or maybe he did it because he didn't want any credit, but that credit is due. When I talked to him about this idea I wasn't sure where to get the pieces I needed to pull it off. He suggested I find pill or medicine bottles of the right size and trim them off at the neck, leaving me with the threaded section and cap. I'd just have to find the right sizes to fit the rods and butt caps I was using. But that's the tip that really got me thinking. As we were hanging up the phone it hit me that I could use cheap reel seat parts to do the same thing. So that's how it all came together. Again I'm glad you found it helpful. Re: New issue of RM
Posted by:
Bill Eshelman
(---.skylan.net)
Date: February 10, 2010 06:29AM
I too thought that was a good idea and will deffinetley (sp) give it a try. Articles like that really make it a good magazine. Ohio Rod Builders Canton, Ohio Re: New issue of RM
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 10, 2010 09:54AM
hay Bill Colby got any pictures of the set up, or is that cheating
Think I get an idea of what you did. Bill - willierods.com Edited 1 time(s). Last edit at 02/10/2010 09:55AM by bill boettcher. Re: New issue of RM
Posted by:
Peter Sprague
(---.reverse.vilayer.com)
Date: February 10, 2010 10:10AM
Its a slick idea for sure. Opens up a lot of possibilities! Re: New issue of RM
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 10, 2010 10:15AM
Caps can be glued into a nice cork or what ever end cap and you would not see it.
Got to tell every one I know that I want there empty bottles. Also used as a weighted butt. Bill - willierods.com Edited 1 time(s). Last edit at 02/10/2010 12:19PM by bill boettcher. Re: New issue of RM
Posted by:
Bob Balcombe
(---.dyn.centurytel.net)
Date: February 10, 2010 02:03PM
This same idea can be used on making fighting butts Good Wraps Bob Sorry, only registered users may post in this forum.
|