I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Lathe foot switch
Posted by: David Teague (---.asm.bellsouth.net)
Date: January 25, 2010 04:32PM

First off thanks for all the replies to my thread about renzetti lathes.
I have decided to bite the bullet and buy one, however I will be getting the basic package and will power it myself. I've been looking though my cache of past issues of rodmaker looking for the article about the bench length foot control and can't find it. Anyone have plans that they could email me?


Dave

Options: ReplyQuote
Re: Lathe foot switch
Posted by: Tom Kirkman (Moderator)
Date: January 25, 2010 04:36PM

You'll find that article in the series on the mobile rod lathe workstation. The foot control is highlighted in the volume 10 #5 issue.

I highly recommend the 1/10HP motor that Renzetti offers. It's a powerful motor and equally at home either wrapping or doing light duty turning chores.

...........

Options: ReplyQuote
Re: Lathe foot switch
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: January 25, 2010 09:37PM

David sent you photos of the pedal on my bench, do not know if they will help

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster