SPONSORS
2024 ICRBE EXPO |
Lami LMB844 Specs
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: January 07, 2010 07:04PM
I found in my stash of blanks a Lamiglas LMB 844. Can someone give me the lure rating , line rating and action of this blank. All it has on it is the model number, no other info. The butt miked .551 with a #6 tip. Has a ground Graphite finish, no gloss. This might be a 2007 or 8 year model because it is not in the 2009 blank catalog. And I don't have one older than 2009. I bought it at the Show last year, I think from Fishstix.
Appreciate any info I can get. J.B.Hunt Bowling Green, KY Re: Lami LMB844 Specs
Posted by:
Alex Dziengielewski
(24.145.81.---)
Date: January 07, 2010 07:08PM
Not an '08... that's the oldest Lami catalog I have and it isn't in there. ----------------- AD Re: Lami LMB844 Specs
Posted by:
Dan Ertz
(---.dsl.airstreamcomm.net)
Date: January 07, 2010 10:43PM
A Google search popped up this.
7' 12-20 line 1/4-1 oz. .515 butt 5 1/2 tip $213.00 [www.rodbuildersupplies.com] Dan Re: Lami LMB844 Specs
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: January 08, 2010 12:31AM
Yep, that's the one. Thanks Dan.
I think Lamaglas has discontinue that particular blank . I may have the only one in existence that isn't broken. J.B.Hunt Bowling Green, KY Re: Lami LMB844 Specs
Posted by:
Robert Russell
(---.austin.res.rr.com)
Date: January 08, 2010 11:02AM
Jay Hunt Wrote:
------------------------------------------------------- > Yep, that's the one. Thanks Dan. > > > > > I think Lamaglas has discontinue that particular > blank . > I may have the only one in existence that isn't > broken. I have 2 and they are broken. Re: Lami LMB844 Specs
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: January 08, 2010 12:10PM
Maybe I should go ahead and break this one and not build on it LOL. J.B.Hunt Bowling Green, KY Re: Lami LMB844 Specs
Posted by:
Robert Russell
(---.austin.res.rr.com)
Date: January 08, 2010 10:36PM
Jay Hunt Wrote:
------------------------------------------------------- > Maybe I should go ahead and break this one and not > build on it LOL. JB, The perfect spot seems to be about 14" from the butt. That's where bothy mine broke. You could build you a nice 5'10" rod. Re: Lami LMB844 Specs
Posted by:
Chuck Mills
(---.gctel.stellarllc.net)
Date: January 09, 2010 10:38AM
I just bought an 864. Is there a problem with the design? Re: Lami LMB844 Specs
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: January 10, 2010 08:58AM
From what I have learned, the LMB 844 is the only one that had this design problem, thus the reason for discontinuing that particular model.
You are good to go with the 864. J.B.Hunt Bowling Green, KY Sorry, only registered users may post in this forum.
|