SPONSORS
2024 ICRBE EXPO |
Fuji Reel Seat Help
Posted by:
Mitch Leppelmeier
(---.dsl.bcvloh.sbcglobal.net)
Date: January 04, 2010 05:38PM
Does anyone have the OD of the hood for a Fuji sz 22 spinning reel seat? Re: Fuji Reel Seat Help
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: January 05, 2010 12:32AM
The largest I ever build on or have on hand is a #20. Sorry Mitch. J.B.Hunt Bowling Green, KY Re: Fuji Reel Seat Help
Posted by:
Tom Kirkman
(Moderator)
Date: January 05, 2010 08:28AM
It's about 29mm. It will be a little large measured top to bottom as the hood flares in the area where the reel foot is inserted.
.............. Re: Fuji Reel Seat Help
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: January 05, 2010 01:48PM
There's a small graphite/nylon flange in front of the metal hood that actually makes contact with the grip. That flange on a DPSM22 measures 28.4mm (1.118") Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Fuji Reel Seat Help
Posted by:
Mitch Leppelmeier
(---.dsl.bcvloh.sbcglobal.net)
Date: January 05, 2010 03:59PM
Thanks a lot! That's exactly what i was looking for. Sorry, only registered users may post in this forum.
|