I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

What is the diameter of nylon and metal threads?
Posted by: sanford hochman (---.hsd1.ma.comcast.net)
Date: December 22, 2009 08:10AM

I have not had any luck finding an e-mail with the size of threads. I know this has been on the board before. Could someone help me in this search. I would like to know particularly the size of B and A threads. Thanks.
Sanford

Options: ReplyQuote
Re: What is the diameter of nylon and metal threads?
Posted by: John Krukemeier (---.dsl.ipltin.sbcglobal.net)
Date: December 22, 2009 08:49AM

This link should help.

[www.efunda.com]

Options: ReplyQuote
Re: What is the diameter of nylon and metal threads?
Posted by: sanford hochman (---.hsd1.ma.comcast.net)
Date: December 22, 2009 09:01AM

John,
thanks, but I was looking for the nylon and metal thread size of Gruderbrod and Fishhawk. The thread used in rodbuilding, not metal screws or bolts. Sorry I wasn't clear.
Sanford

Options: ReplyQuote
Re: What is the diameter of nylon and metal threads?
Posted by: Bill Stevens (---.br.br.cox.net)
Date: December 22, 2009 03:50PM

sanford I have some of the information you seek - Gudebrod only

Please unhide your email or respond to me via email ans I will send it to you via attachment - it is expressed in number of wraps per cm of width and is listed on the Gudebrod site..

Options: ReplyQuote
Re: What is the diameter of nylon and metal threads?
Posted by: Mike Thompson (67.239.188.---)
Date: December 22, 2009 10:32PM

Sanford - shoot me an email and I can find out exactly what your wanting to know and give you the answers you need concerning the Fish Hawk threads.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster