SPONSORS
2024 ICRBE EXPO |
CTS rod blanks - where to buy?
Posted by:
Mike Rury
(206.135.145.---)
Date: December 21, 2009 12:33PM
I'm putting together my winter rod building project (a 9' 4-piece 5 wt). I was going to build a dan craft (own a Sig III, probably build a FT) and did a quick search on here to see if any new opinions have come out about DC rods.
One post also mentioned something about CTS blanks being top notch... but I can't seem to find where to buy them in the US? Any suggestions? I'd like to check them out for the right price. thanks. Re: CTS rod blanks - where to buy?
Posted by:
Mark Blabaum
(---.dsl.mhtc.net)
Date: December 21, 2009 12:54PM
I see that Fish Sticks has some listed [www.fishsticks.us] . Re: CTS rod blanks - where to buy?
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: December 21, 2009 12:55PM
Scott Parsons at Fishsticks4u carries them, here is the direct link to their site: [www.fishsticks4u.com] Re: CTS rod blanks - where to buy?
Posted by:
Mike Rury
(206.135.145.---)
Date: December 21, 2009 01:16PM
Thanks guys... anyone know where the Affinity One fits in relative to the Affinity MX and Affinity X?
CTS's website doesn't have that model in their fly blank graphic: [www.ctsfishing.com] Re: CTS rod blanks - where to buy?
Posted by:
Scott Parsons
(205.244.119.---)
Date: December 21, 2009 03:25PM
Mike, I don't believe CTS offers the Affinity One any longer, just the MX and X. I am their Distributor and will be glad to help you. Just shoot me an email and I will get you pricing and availability. Thanks
Scott Parsons Re: CTS rod blanks - where to buy?
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: December 21, 2009 07:51PM
I have a couple of the CTS Fly rod blanks. I would rate them as some of the best out there and cheaper than buying a high end Sage or Winston, but just as sweet in the hand. I don't think you would be unhappy with one. Re: CTS rod blanks - where to buy?
Posted by:
Donald Becker
(---.lava.net)
Date: December 21, 2009 09:50PM
Mike Rury Wrote:
------------------------------------------------------- > Thanks guys... anyone know where the Affinity One > fits in relative to the Affinity MX and Affinity > X? > CTS's website doesn't have that model in their fly > blank graphic: > > [www.ctsfishing.com] Mike, You may want to call Bob Meiser. He was one of the boards sponsors. It is my understanding that he has a good knowledge regarding CTS fly rods. [www.meiserflyrods.com] Don Don Becker Re: CTS rod blanks - where to buy?
Posted by:
jon tobey
(199.233.178.---)
Date: March 26, 2013 11:48AM
Looks like FishSticks isn't carrying these anymore? I'm not finding a supplier, anybody know of one? jontobey@yahoo.com www.gointothelight.wordpress.com Sorry, only registered users may post in this forum.
|